Spectrophotometric determination of boron with an azomethine H derivative

Summary An azomethine H derivative, 1-(2,4-dihydroxybenzylidene-amino)-8-hydroxynaphthalene-3,6-disulphonic acid (azomethine HR) was examined and proposed as a spectrophotometric reagent for boron, as compared with azomethine H. Azomethine HR reacts with boron in aqueous solution (pH 7.5) to form a yellow complex having an absorption maximum at 425 nm. The sensitivity is 3.5-fold greater than with azomethine H when the same reagent concentration is applied. Basic conditions for the determination of boron have been worked out. The method is applicable to sea and hot spring waters. The standard deviation is ±2.1%.

---

Spektralphotometrische Borbestimmung mit einem Azomethin H-Derivat

     

Effect of pressure on the thermotropic phase behavior of surfactant assemblies in water

The temperature (T)—pressure (P) phase diagrams of aqueous solutions of a homologous series of cationic surfactants, tetradecyl- (C14TAB), hexadecyl- (C16TAB), and octadecyltrimethylammonium bromide (C18TAB), have been determined by observing the sudden change of the transmittance accompanying the phase transition under high pressure up to 160 MPa. Regarding three kinds of phase transitions which have been previously assigned by the differential scanning calorimetry (DSC) (S. Kaneshina and M. Yamanaka, J. Colloid Interface Sci.131, 493, 1989), all the transition temperatures were linearly elevated by applying pressure. The volume changes associated with the transitions were estimated from the Clapeyron—Clausius equation by using the values of the T—P slopes on the phase diagrams and of the transition entropies taken from the DSC study. A chemical potential vs pressure profile, of which slope reflects the partial molar volume, among the states of surfactant assemblies, i.e., micelle, gel, and coagel, was drawn schematically on the basis of the transition volumes. The phase boundary between the coagel phase and the micellar solution should be the critical solution line of the surfactant, representing the pressure dependence on the Krafft temperature. In the C18TAB-water system, the phase boundary line between the metastable gel and the supercooled micelle had a break point at 45 MPa, suggesting the existence of a new pressure-induced mesophase above 45 MPa. The metastable gel phase of C14TAB disappeared in the pressure range up to 160 MPa.     

Self-aggregation of synthetic zinc oxo-bacteriochlorins bearing substituents characteristic of chlorosomal chlorophylls

We prepared novel zinc 8-ethyl-8-methyl-7-oxo- and 7-ethyl-7-methyl-8-oxo-bacteriochlorins 1 and 2 possessing substituents characteristic of chlorosomal chlorophylls, exclusively observed in extramembraneous light-harvesting antennas of photosynthetic green bacteria. The electronic absorption spectra of monomeric 1 and 2 in THF were obviously different: the Q(y) maximum of the former was 724 and that of the latter was 683 nm. This observed spectral difference was clearly explained by theoretical ZINDO/S calculation of their energetically minimized molecules. The optical properties of monomeric 1/2 were controlled by the electronic effect of the 7/8-oxo groups. Specific spectral changes in the electronic, CD, and FT-IR absorption spectra by dilution of the monomeric THF solutions of 1/2 with a 100/200-fold volume of cyclohexane showed the formation of chlorosomal self-aggregation species constructed by 13-C=O...H-O(3(1))...Zn and pi-pi stacking. Especially, the red-shift values in the Q(y) band of 1/2 by self-aggregation were 2450/1970 cm(-1), indicating that exciton interaction among the composite molecules in the self-aggregation of 1 was stronger than in those of 2. Molecular model calculations for dodecamers of 1/2 based on a parallel chain arrangement gave partially different supramolecular structures; the specific hydrogen-bonding distances in 2-dodecamer were larger than those of 1-dodecamer, while both coordinations gave the same Zn-O distance. These modeling results showed that 1 was more tightly packed in the self-aggregates to give a larger red-shift value in the Q(y) band by self-aggregation than 2. The difference in the supramolecular structures is mainly ascribable to the steric effect of 8/7-dialkyl groups in self-aggregates of 1/2.     

Asymmetric synthesis of highly substituted beta-nitro alcohols and enantiomerically enriched 4,4,5-trisubstituted oxazolidinones

It is demonstrated that alpha,alpha-disubstituted-alpha-nitroketones are reduced to the corresponding trisubstituted nitro alcohols in good to excellent yield and enantiomeric excess by borane-dimethyl sulfide in the presence of a chiral oxazaborolidine catalyst. Reduction of the nitro alcohols to the corresponding amino alcohols and their subsequent conversion to enantiomerically enriched 4,4,5-trisubstituted oxazoldinones is also reported.     

Penicillin-cephalosporin conversion X. New synthesis of dithioazetidinones from thiazoline-azetidinones

New ring-opening reaction of thiazoline-azetidinones 1 to dithioazetidinones 2 was achieved with 2-benzothiazolyl disulfide in aqueous acidic media and its potentiality for the preparation of a variety of cephalosporins 3 from various thiazoline-azetidinones 1 is demonstrated.     

Transformation of actoHMM assembly confined in cell-sized liposome

To construct a simple model of a cellular system equipped with motor proteins, cell-sized giant liposomes encapsulating various amounts of actoHMM, the complexes of actin filaments (F-actin) and heavy meromyosin (HMM, an actin-related molecular motor), with a depletion reagent to mimic the crowding effect of inside of living cell, were prepared. We adapted the methodology of the spontaneous transfer of water-in-oil (W/O) droplets through a phospholipid monolayer into the bulk aqueous phase and successfully prepared stable giant liposomes encapsulating the solution with a physiological salt concentration containing the desired concentrations of actoHMM, which had been almost impossible to obtain using currently adapted methodologies such as natural swelling and electro-formation on an electrode. We then examined the effect of ATP on the cytoskeleton components confined in those cell-sized liposomes, because ATP is known to drive the sliding motion for actoHMM. We added α-hemolysin, a bacterial membrane pore-forming toxin, to the bathing solution and obtained liposomes with the protein pores embedded on the bilayer membrane to allow the transfer of ATP inside the liposomes. We show that, by the ATP supply, the actoHMM bundles inside the liposomes exhibit specific changes in spatial distribution, caused by the active sliding between F-actin and HMM. Interestingly, all F-actins localized around the inner periphery of liposomes smaller than a critical size, whereas in the bulk solution and also in larger liposomes, the actin bundles formed aster-like structures under the same conditions.     

Frequency response of the glucose sensor based on immobilized glucose oxidase membrane

Frequency response of the glucose sensor based on the immobilized glucose oxidase membrane was investigated experimentally by giving the sinusoidal change of glucose concentration to the glucose sensor and observing its output signal. Observed values of gains and phase lags of the frequency response of the glucose sensor followed the frequency response model of the first-order with dead time; The time constant and also the dead time were estimated and found to decrease as the amount of enzyme immobilized in the membrane increased and the thickness of the membrane decreased.

     

New reactions of a dibenzo[a,e]pentalene

Reduction of dibenzo[a,e]pentalene 3 (denoted as dibenzopentalene hereafter) with excess lithium gave dilithium dibenzopentalenide 1. Since oxidation of 1 with iodine gave 3, redox behavior between 1 and 3 is controllable and reversible. Reaction of 3 with methyllithium gave lithium 5-methyldibenzopentalenide 5, the formation of which was evidenced by some trapping experiments and X-ray crystallographic analysis. Reactions of 3 with halogens gave 5,10-dihalodibenzopentalenes, 8 and 9. Some optical properties of novel dibenzopentalene derivatives are also demonstrated.     

Catalytic activity and regeneration property of a Pd nanoparticle encapsulated in a hollow porous carbon sphere for aerobic alcohol oxidation

A core-shell composite consisting of a palladium (Pd) nanoparticle and a hollow carbon shell (Pd@hmC) was employed as a catalyst for aerobic oxidation of various alcohols. The core-shell structure was synthesized by consecutive coatings of Pd nanoparticles with siliceous and carbon layers followed by removal of the intermediate siliceous layer. Structural characterizations using TEM and N(2) adsorption-desorption measurements revealed that Pd@hmC thus-obtained was composed of a Pd nanoparticle core of 3-6 nm in diameter and a hollow carbon shell with well-developed mesopore (ca. 2.5 nm in diameter) and micropore (ca. 0.4-0.8 nm in diameter) systems. When compared to some Pd-supported carbons, Pd@hmC showed a high level of catalytic activity for oxidation of benzyl alcohol into benzaldehyde using atmospheric pressure of O(2) as an oxidant. The Pd@hmC composite also exhibited a high level of catalytic activity for aerobic oxidations of other primary benzylic and allylic alcohols into corresponding aldehydes. The presence of a well-developed pore system in the lateral carbon shell enabled efficient diffusion of both substrates and products to reach the central Pd nanoparticles, leading to such high catalytic activities. This core-shell structure also provided high thermal stability of Pd nanoparticles toward coalescence and/or aggregation due to the physical isolation of each Pd nanoparticle from neighboring particles by the carbon shell: this specific property of Pd@hmC resulted in possible regeneration of catalytic activity for these aerobic oxidations by a high-temperature heat treatment of the sample recovered after catalytic reactions.